CHAIN & BUCKET GRIT COLLECTORS

DESIGN FEATURES

 

SIDE VIEW

  1. Optional DuraMax H78SS or H82SS cast stainless steel drive chain

    Stainless Steel, Polymeric, or Cast Iron segmental rim drive and driven sprockets

  2. High-torque, shaft-mounted drive reducer, or optional chain and sprocket drive assembly

    Reducer designed for the fully loaded condition with 200,000 hour (22.8 year) reducer design life with 1.5 SF

    Factory furnished synthetic gear oil and water-proof grease

    1.25 SF variable speed motor with greaseable bearings

    200,000 hour L-10 (22.8 year) self-aligning Headshaft Bearing and Take-up Assemblies with tapered roller bearings and heavy-duty seals

  3. Heavy-duty, self-supporting all stainless steel frame and housing with 304/316 stainless steel anchor bolts and hardware

  4. DuraMax CS720S Cast 15-5/17-4 or 316 Stainless Steel Chain and Attachments

  5. Stainless Steel Return Tracks and Supports

    Optional virgin UHMW-PE Track Liners

  6. Corrosion and abrasion resistant Cast 316 Stainless Steel, Polyurethane, Nylon-6 or UHMW-PE hunting-tooth segmental rim Headshaft and Cornershaft Sprockets with chainsaver rims, mounted on fabricated stainless steel or cast iron hubs, with 316 stainless steel hardware

  7. Heavy-duty stainless steel, carbon steel and polymeric buckets

    Polyurethane, Nylon-6/6 and UHMW-PE wearshoes

  8. Heavy-duty stainless steel hold-down angle

  9. 17-4 heat-treated and through hardened Stainless Steel or UHMW-PE Wearbar

 

END VIEW

  1. Self-aligning water lubricated cast iron wall bearings with Chromium-Cobalt-Tungsten-Nickel alloy or poured lead babbited bushings

  2. Corrosion and abrasion resistant 17-4 heat-treated Stainless Steel shafting, with optional Chromium-Cobalt-Tungsten-Nickel alloy sleeves

  3. Stainless Steel Return Tracks and Supports

    Optional virgin UHMW-PE Track Liners

  4. Corrosion and abrasion resistant Cast 316 Stainless Steel, Polyurethane, Nylon-6 or UHMW-PE hunting-tooth segmental rim Headshaft and Cornershaft Sprockets with chainsaver rims, mounted on fabricated stainless steel or cast iron hubs, with 316 stainless steel hardware

  5. Heavy-duty stainless steel, carbon steel and polymeric buckets

    Polyurethane, Nylon-6/6 and UHMW-PE wearshoes